New Product: JKS JK Wrangler Rear Trackbar Bracket

Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV-type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points.

Our Relocation Brackets also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time.

Product Features:

• Heavy-duty reinforcement bracket mounts directly to factory track bar bracket on axle housing
• Angled design corrects rear track bar geometry on lifted vehicles that have rotated axle housing or CV-type driveshaft
• Relocated mounting point tilts forward to eliminate binding and premature bushing wear
• Premium steel construction is laser cut, formed and folded for maximum strength
• Economical bolt-on solution minimizes risk of track bar failure on the trail

More Info Available Here: http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=13_30_233&products_id=2757

New Product: Bushwacker YJ Wrangler Flat Style Fender Flares

Bushwacker’s new Flat Fender flares for Jeep YJ Wranglers set the standard for flat-fenders in style, function, and durability. The newly designed flare offers more clearance for taller, wider tires by eliminating the factory flare’s overhang and extending a full six inches from the body. Made of extreme-duty TPO plastic that’s more durable and flexible than ABS, the flares are guaranteed not to sag like urethane flares, or chalk like factory flares. Plus, they’re the only flat-fender flares to include a DOT side marker light and reflector, keeping your Jeep street legal. And the fit and finish is outstanding, making them the best looking and best designed flares on the market. If you’ve got a Jeep YJ, check out Bushwacker’s new flares today!

Features:

• Adds additional coverage, great for large wheel and tire packages
• Includes 50-state legal LED marker light!
• Easy No-Drill installation process
• 100% UV protection. No chalking, No cracking, No warping
• Extreme TPO material gives maximum durability and flexibility
• OEM matte black finish, or easily custom painted to match or accent any vehicle

Check them out at MotionOffroad.com here: http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=51_350_85&products_id=2703

New Product: Surco Roof Racks & Accessories

We’ve just taken shipment of more Surco inventory! Due to the popular demand of the 45″ x 60″ and the constant request for additional sizes we’ve now started to carry the full Surco Roof Rack & Accessories for the rack’s in stock!

We’ve had great luck with our Surco roof racks over the past few years. These Surco Safari basket racks mount to your factory roof rack, multi-rack system, or rain gutters, and allow you to store cargo more securely. Features include durable 3/4 in. square aluminum tubing construction (NO RUST!), a black powdercoat finish, a sturdy aluminum floor, and an easy installation with no drilling required.

Checkout our expanded line of Surco products here: http://motionoffroad.com/catalog/index.php?main_page=index&manufacturers_id=51

New Product: Motion Offroad TJ Wrangler CB Radio Mount

Due to the popularity of our JK radio mounts we’ve now got them available for the TJ! Easily mount a CB radio in your TJ Wrangler. The easiest TJ Wrangler CB mount to install on the market! Can be mounted and ready within 10 minutes. Allows you to store your CB up out of the way without obstructing the view of the rearview mirror. Mounts to windshield using existing holes. A right angle coax adapter is also supplied so the CB can be mounted as close to the windshield as possible. Will work with hard or soft top. High quality stainless steel construction. Designed to work with smaller radio’s like our Cobra 19 Ultra III CB. Lazer cut and precision bent for a perfect fit every time. Fits all model TJ’s from 1997-2006. MADE IN THE USA!

More information and photo’s can be found here: http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=304&products_id=2545

 

New Product: Motion Offroad Factory MJ Comanche Leaf Springs

Finally available! You’ve asked for them, we’ve delivered! Works great in a SOA application!

These springs are factory replacement stock 4wd springs and mount under the axle just like the originals. They will give no lift over stock. They have 3 leaves plus the 1 overload leafs (3+1 style) and are equipped with O.E.M. type rubber bushings. These ONLY fit the MJ Comanche’s (will not fit the XJ) and fit both the SWB and LWB models. We have these made for us in the USA to our specs! Backed by our LIFETIME WARRANTY!

Sold as a set (2 leafs).

More Info Here: http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=13_26_332&products_id=2542

New Product: Rough Country Jeep XJ Shackle Relocation Kit

Notes:

• Fits 84-01 Jeep XJ Cherokee models ONLY.
• Adds approximately 1″-1.5″ of lift.
• Longer rear shocks are recommended.
• A taller coil or coil spacers in the front are recommended to level the vehicle.
• Exhaust modifications may be required for adequate clearance of the shackle bracket.

Benefits:

• Fine tune the rear suspension of your XJ.
• Places shackle in optimum location for maximum articulation.
• Allows for greater articulation off-road.

Kit Contents:

• Rear: Frame brackets, shackle brackets and hardware.

Install Video:

Available from MotionOffroad.com here: http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=13_27&products_id=2537

New Product: Fox 2.0″ Factory Performance Shocks

The all-new 2.0 Factory Performance Series Shocks give you legendary FOX performance in an ultra heavy duty, bolt-on package. This all-new shock features a high-flow piston, deflective disc technology, and an Internal Floating Piston (IFP) that creates a perfect racing-oil/air separation to provide incredible fade-free damping performance giving you precise handling, control and stability. The 6061-T6 one-piece body and billet rod end, stout 5/8″ shaft, and anodized components ensure the 2.0 Factory Performance Series unsurpassed durability.

Available for the Jeep Wrangler JK, Wrangler TJ, Grand Cherokee ZJ, Cherokee XJ, and Comanche MJ.

View the full line here: http://motionoffroad.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Fox+2.0%22+Factory+Performance+S&x=0&y=0

New Product – Hanson Offroad Jeep MJ Comanche Rear Bumper

You asked, we delivered! This all-new Hanson Offroad rear bumper with receiver is designed and built specifically for the Jeep Comanche pickup. Built from laser-cut 3/16″ formed steel and featuring a receiver hitch with support braces, this bumper is the perfect compliment to all of our Hanson front bumper option on your MJ. Bumper is fully welded and brackets are cut to fit all models of MJ trucks. Finished unit ships with complete hardware and is coated in a semi-gloss black powdercoat.

More info is available on MotionOffroad.com by clicking here: http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=1_328&products_id=2229

New Product – Zone Offroad Jeep WK Grand Cherokee 4″ Suspension System

This complete system includes new steering knuckles, drop crossmembers, and differential drop brackets. These components maintain factory operating geometry to ensure compatibility with the factory ESP system. The lift is achieved with front struts spacers and new rear coils to maintain the factory ride. Different from the competition, Zone Offroad includes greasable rear upper adjustable control arms to give you the ability to fine tune an optimal pinion angle. A rear track bar bracket is used to center the rear axle. The Zone kit also contains front and rear sway bar links and brake line relocation brackets. For increased offroad protection a differential skid plate has been integrated. Upgrade your Jeep WK with Zone Offroad and you won’t be disappointed with the quality of the parts and value offered by our system.

Features:

• Heavy duty front and rear crossmembers with an integrated skid plate
• Differential drop brackets
• New steering knuckles
• Front strut spacers
• Rear coil springs
• Rear track bar bracket
• Greasable upper adjustable rear control arms
• Front and rear sway bar links
• Front and rear brake line relocation brackets
• New rear shocks included

Notes:

1. Strut compressor required for installation
2. Aftermarket wheels with maximum of 5.5″ backspacing required
3. Frame bracket modification required
4. Although unusual, if ESP problems persist the AEV EGR module can be used to dramatically reduce the issues.

 

More info is available on MotionOffroad.com here – http://motionoffroad.com/catalog/index.php?main_page=product_info&cPath=12_61&products_id=2387

New Product: Jeep AMC Emblems/Badges

The badges come with pre-applied double sided adhesive tape for a quick and easy installation. Sold Each

This badge and others are available at MotionOffroad.com here – http://motionoffroad.com/catalog/index.php?main_page=index&cPath=51_371